Blog

Birch Bowl With A Burned Ring Top

Birch Bowl With A Burned Ring Top

Here’s a Birch bowl that I recently finished. This was a piece of heartwood so the color has a pleasing reddish-orange shade to it.

I accented the top and side with a bit of burned-in rings and squares. The ring around the outside edge was burned using a piece of wire and the three rings on the top were done with a thin piece of ebony (not the most efficient but it worked). The lines that create the squares were burned in with a woodburning pen.

Birch Bowl With A Burned Ring Top

The bowl is approximately 7″ in diameter and a bit less than 2″ tall. It was finished with Tung oil and then buffed with the Beall Buffing System.

Here are a couple of more photos of the bowl:


Here’s one similar to the one above but with a bit of a different angle:

Birch Bowl With A Burned Ring Top

Here’s one looking down on the top, showing the rings and squares:

Birch Bowl With A Burned Ring Top

Here’s a side view, showing the angle of the side and the center ring:

Birch Bowl With A Burned Ring Top

Back to the shop…

You may also like

No comments yet.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.