{"id":12333,"date":"2008-02-17T22:45:54","date_gmt":"2008-02-17T22:45:54","guid":{"rendered":"http:\/\/ravenview.com\/?p=12333"},"modified":"2016-07-26T23:23:57","modified_gmt":"2016-07-26T23:23:57","slug":"woodworking-tips-tidbits-021708","status":"publish","type":"post","link":"https:\/\/ravenview.com\/woodworking-tips-tidbits-021708\/","title":{"rendered":"Woodworking Tips And Tidbits – 02\/17\/08"},"content":{"rendered":"
2. Wipe exotic woods with a little acetone to clear the oils before gluing.<\/p>\n
3. To slow checking as you turn a piece of green wood you can spray with water.<\/p>\n
4. After you rough turn a bowl using green wood seal the outside only, leaving the inside unsealed. This will speed up drying and allow more even drying.<\/p>\n
5. If you have one of those vacuum sealers used for food they also work great for keeping your used paint brushes from drying out overnight, minimizing the need to clean them between painting sessions.<\/p>\n
6. To mark a straight line on a dowel place it in the miter slot of your table saw and then draw a straight line where the edge of the slot meets the dowel. If your dowel is smaller than 3\/4″ round cut a smaller dado in a scrap piece of wood and use the same technique.<\/p>\n
These are a few woodworking tips and tidbits that we picked up (and\/or wrote down) over the past week. They come from a variety of sources including magazines, newsletters, online and personal experience.<\/p>\n