{"id":8830,"date":"2008-03-19T10:30:38","date_gmt":"2008-03-19T14:30:38","guid":{"rendered":"http:\/\/www.woodworkersguide.com\/2008\/03\/19\/walnut-bowl-from-the-whipping-wind\/"},"modified":"2016-03-13T12:33:45","modified_gmt":"2016-03-13T12:33:45","slug":"walnut-bowl-from-the-whipping-wind","status":"publish","type":"post","link":"https:\/\/ravenview.com\/walnut-bowl-from-the-whipping-wind\/","title":{"rendered":"Walnut Bowl From The Whipping Wind"},"content":{"rendered":"
However, I was able to get out there for a few hours and turn a small bowl out of Walnut. The bowl is 5″ in diameter and 1 3\/4″ tall with straight sides and a shallow curved bottom: <\/p>\n
I found the walnut fairly easy to turn, in fact, quite enjoyable. It finished up well too. Walnut always finishes with a look of elegance, as confirmed by even my limited turning skills. \ud83d\ude42<\/p>\n
Here’s a sequence of photos showing the steps I took to create this bowl.<\/p>\n
This first photo shows how I cut the bowl blank out of a chunk of walnut using the Circle Cutting Jig<\/a><\/p>\n This is the completed bowl blank:<\/p>\n Next, the bowl blank is mounted on a faceplate:<\/p>\n And then mounted on the lathe with the bottom of the bowl facing you:<\/p>\n