{"id":8905,"date":"2009-01-10T08:14:29","date_gmt":"2009-01-10T12:14:29","guid":{"rendered":"http:\/\/www.woodworkersguide.com\/?p=930"},"modified":"2016-07-18T11:47:22","modified_gmt":"2016-07-18T11:47:22","slug":"craftsman-style-coffee-table-part-7","status":"publish","type":"post","link":"https:\/\/ravenview.com\/craftsman-style-coffee-table-part-7\/","title":{"rendered":"Craftsman Style Coffee Table – Part 7"},"content":{"rendered":"
When I first started to apply the first coat of polyurethane (MinWax Wipe-On Poly) all seemed well but then I started to notice that the stain was starting to lighten. The more I looked the more I realized that I was actually rubbing off the stain! Since I wasn’t using any excessive pressure I figured that the stain was not thoroughly dried yet (although it had been drying for 3 days and by all accounts appeared dry). I stopped doing the rest and, of course, had to re-sand and re-stain the pieces that I had applied the poly to. <\/p>\n
This time I let the stain dry for over a week and attempted to wipe on the poly again but the same thing happened! Perplexed, I re-sanded and re-stained the pieces again.<\/p>\n
Not taking anymore chance I let the stain dry for two weeks this time and because wiping the poly on was removing the stain I decided that I would brush it on. So that’s what I did, over a period of a week I brushed on several coats of wipe-on poly. It finally finished up beautifully. \ud83d\ude42<\/p>\n
Once the poly was dried, (and boy, did I let it dry!) it was time to put it all together. Here are some photos of this process:<\/p>\n
Here is one of the ends glued and clamped together:<\/p>\n
And here is now with the legs attached:<\/p>\n
Once these were dried the skirt and bottom shelf was glued and clamped together:<\/p>\n
Then it was flipped over and the table top was attached using the ‘buttons’:<\/p>\n
Now, because of the abuse that a table top can be subject to I will give it several more coats of polyurethane to ensure a durable and long-lasting finish.<\/p>\n
You can follow along with the building of the rest of this project via these links:<\/p>\n
<\/p>\n <\/strong><\/p>\n Back to the shop… <\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":" Next, it was time to apply the polyurethane topcoat on the Craftsman style coffee table. Usually, this is a pretty straight forward process. Adhering to a few simple rules such as using a quality product, applying it in even, full length strokes, minimizing dust in the shop and lightly sanding between coats most often results […]<\/p>\n","protected":false},"author":1,"featured_media":9608,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[182],"tags":[1130,2436],"yoast_head":"\n